Serving homeowners and businesses for over 90 years.

J.D. Helton

Roofing Advice From Tennessee's Trusted Roofing Experts.

White TPO roofing membrane with hot-air seam welder on a sunny commercial roof

TPO Roofing Benefits for Energy-Conscious Building Owners

September 29, 2026

TPO roofing benefits start with energy efficiency. A white TPO membrane reflects sunlight, so the roof and the building below stay cooler and the air conditioning runs less. TPO seams are heat welded, not glued, so they resist leaks. It costs less than many other roofing systems, about $5.50 to $8.50 per square foot installed. And with a 60 or 80 mil membrane, manufacturer warranties can reach 20 to 30 years.

⚡ QUICK SUMMARY

TPO roofing is a single ply roofing membrane that is white and reflective. Dark roofs can hit 150 degrees F in summer sun. A cool roof can stay more than 50 degrees cooler. Seams are heat welded into one solid sheet. Installed cost runs $5.50 to $8.50 per sq ft. We install Carlisle TPO roofing on hospitals, offices, and plants across Chattanooga.

Chattanooga summers are long and hot. Your roof takes the worst of it. It also drives a big share of your cooling costs. That is why so many building owners here ask us about TPO roofing. J.D. Helton Roofing Co., Inc. is a family-owned commercial and industrial roofing contractor in Chattanooga, Tennessee. We have roofed buildings across the Southeast since 1932. We are an authorized Carlisle roof systems partner and hold Tennessee license #9540. TPO is the roofing system we install most often on flat or low slope buildings. Here is what it does for an energy-conscious owner.

What Is TPO Roofing?

TPO, or thermoplastic polyolefin, is a white roof sheet. Some people say thermoplastic olefin. Same thing. It is a single ply roofing membrane made from a blend of rubber and plastic. It comes in wide rolls, usually white. Crews roll it out over insulation. They fasten or glue it to the roof deck. Then they weld the seams with hot air. TPO membranes are the most used commercial roofing material for flat roofs in the U.S. today. TPO roofing covers offices, schools, and plants alike. It is common on commercial and industrial buildings across the Southeast. TPO roofing systems are made to reflect sunlight.

The welded seam is the big idea. Older single ply roofing used glue or tape at the seams. Heat welded seams melt the two sheets into one watertight bond. That seam is as strong as the roofing membrane itself. Our EPDM vs TPO comparison goes deeper on how TPO stacks up against rubber roofing.

Membrane thickness matters. TPO comes in 45, 60, and 80 mil. Published guides list 60 mil as the commercial standard, with maker warranties of 20 to 25 years. Heavy-traffic roofs often step up to 80 mil for 25 to 30 year coverage (Commercial Roof Guide, 2026).

How Does TPO Roofing Improve Energy Efficiency?

A white TPO roof reflects most of the sunlight that hits it. It does not soak it up. Less heat enters the building. Your AC runs less. Rooftop HVAC units pull in cooler air. The U.S. Department of Energy reports that traditional dark roofs can reach 150 degrees F or more in summer sun. A cool roof under the same sun can stay more than 50 degrees cooler (DOE, Guidelines for Selecting Cool Roofs).

The EPA says a cool roof can cut peak cooling demand by 11 to 27 percent in homes with AC (EPA, Using Cool Roofs to Reduce Heat Islands). Results on commercial buildings vary. Insulation, roof size, and use all play a part. In a warm climate like Tennessee, lower cooling costs show up every summer month on your energy bills.

Dark roof

150°F+

Surface temperature in summer sun (DOE).

Cool white roof

50°+ cooler

Same sun, same day (DOE).

Reflecting Heat Also Makes the Roof Last Longer

Cooler roofs also last longer. Heat is what breaks down roofing over time. It dries out sealant and stresses seams. UV rays chalk and crack many roof surfaces. TPO membranes are made to reflect heat and resist UV exposure. A cooler roof surface means less heat absorption and fewer repairs. Reducing rooftop temperatures also cuts energy costs. Our post on how summer heat affects a commercial roof explains why.

Curious what a white TPO roof would do for your cooling bill? We will look at your roof and give you a straight answer.

Call (423) 867-4400

What Are the Other Benefits of TPO Roofing?

Energy efficiency is the headline, but property owners choose TPO roofing systems for several reasons. Here are the four we hear most.

💧

Leak resistance

Welded seams form one continuous sheet. Fewer seams mean fewer places for water to get in. That is reliable protection.

💵

Cost effectiveness

TPO is one of the most affordable commercial roofing systems at $5.50 to $8.50 per sq ft installed.

🔧

Low maintenance

Punctures are patched with a welded piece of the same membrane. Repairs blend in and hold.

♻

Environmentally friendly

TPO contains no chlorine and can be recycled at the end of its life.

Weather Resistance in Extreme Temperatures

TPO also stands up well to the things that sit on a commercial roof. It resists grease from kitchen vents. It handles the foot traffic of HVAC techs. And it flexes with the building as the weather shifts. It stays soft in cold temperatures and stable in extreme heat. That matters when a Chattanooga day swings 30 degrees. Extreme weather, from summer heat to ice storms, is part of life on a roof here.

Chemical Resistance

TPO membranes handle oils, animal fats, and many chemicals better than EPDM rubber does. That makes TPO roofing a good fit for restaurants, food plants, and factories with rooftop exhaust. It is one of the more forgiving roofing applications for a busy roof.

How Does TPO Compare to Other Roofing Materials?

TPO is one of three common single ply membranes in the commercial roofing industry. The others are EPDM and PVC roofing. All three go on flat or low slope roofs. Each roof type has a place. Here is how they compare.

Roofing materialWhat it isStrengthsTrade-offs
TPO (thermoplastic polyolefin)White plastic and rubber blend, welded seams.Reflective, cost effective, strong seams.Quality varies by maker. Choose a proven brand.
EPDM (ethylene propylene diene terpolymer)Black ethylene propylene rubber, taped or glued seams.Long track record, flexible in cold.Dark surface absorbs heat. Seams need more care.
PVC (polyvinyl chloride)White thermoplastic membrane, welded seams.Top chemical resistance, very durable.Costs more than TPO. Contains chlorine.

PVC roofing and TPO roofing look alike on the roof. Both are white thermoplastic membranes with welded seams. PVC roofing costs more and handles harsh chemicals a bit better. TPO roofing gives most commercial buildings the same reflective properties for less money. EPDM is the budget choice in cold climates, but its dark surface works against you in the Tennessee sun. For most low slope roofs here, TPO roofing is the energy efficient roofing solution.

💡 Pro Tip

Ask which roofing material fits your building, not which one the contractor sells most. The right roofing system depends on your deck, drainage, rooftop equipment, and how long you plan to keep the building.

What Does the TPO Installation Process Look Like?

Proper installation turns a good roofing material into a good roof. Installation quality matters more than the brand on the roll. A TPO roofing system goes on in four steps. The roof must be structurally sound first. The same steps apply to most low slope commercial roofs.

1Prepare the existing roof

We tear off the old roof or, if it is dry and sound, recover it. We check the deck and fix soft spots.

2Set the insulation

Rigid insulation boards go down over the deck. This is where a lot of the energy savings live.

3Attach the membrane

The roofing membrane is mechanically attached with plates and screws. Or it is fully adhered with glue. Screwed-down roofs cost less. Glued roofs lay flatter and handle wind better.

4Weld the seams

Every seam is hot-air welded and probed. Flashing goes on at walls, curbs, and drains. Edge metal from our shop finishes the roof.

Mechanically Attached vs. Fully Adhered

Both installation methods work. Mechanically attached TPO is easy to install and cost effective. An adhered roof has no fasteners through the membrane and no flutter in high wind. We pick based on the deck, the wind zone, and the budget. On a recover, the roofing membrane can be installed directly over the existing roof when the old roof is dry.

How Much Does a TPO Roof Cost?

Published 2026 cost guides put a complete TPO roof assembly at $5.50 to $8.50 per square foot installed. That covers the membrane, insulation, screws, flashing, and labor. Tear-off of an old roof adds $0.75 to $1.50 (Commercial Roof Guide, TPO Roofing Guide). Big roofs over 50,000 sq ft often come in below that range.

MembraneInstalled cost per sq ft.Typical warranty.
45 mil TPO$5.50 to $6.50.10 to 15 years.
60 mil TPO (standard)$6.50 to $7.50.20 to 25 years.
80 mil TPO$7.50 to $8.50.25 to 30 years.

Every roofing project is different. Deck type, insulation depth, drainage, and the number of rooftop units all move the price. Treat these numbers as a planning range. A site visit gives you a real one.

💡 Pro Tip

Ask about insulation when you ask about TPO. A reflective membrane over thick, dry insulation is where the energy savings really add up. New insulation is also the moment to fix low spots that hold water.

Why Choose Carlisle TPO From an Authorized Installer?

J.D. Helton Roofing is an authorized Carlisle roof systems partner. Being authorized means Carlisle approves our crews to install its TPO systems. That is what makes the long manufacturer warranty available to you.

We have installed TPO roofing on Memorial Hospital in Chattanooga. We did the Tomorrow Building. We did the Southern Surgical Arts building. These are buildings that cannot afford a leak. You can see them on our projects page.

What an authorized TPO install includes

✓

Manufacturer warranty - Backed by Carlisle, not just by the contractor.

✓

Custom metal - Edge metal, coping, and flashing made in our own shop to fit your building.

✓

Trained crews - Heat welding done right. Every seam probed and checked.

✓

Maintenance plan - Two roof checks a year keep the warranty and the roof in good shape.

Is TPO Roofing Right for Your Building?

A TPO roofing system fits most flat or low slope roofs in the Southeast. Offices, schools, clinics, warehouses, and stores are all good matches. Commercial property owners who run air conditioning all summer see the biggest gains. The reflective surface pays you back. Some roofs face harsh chemicals or odd details. For those we may suggest PVC roofing, EPDM, metal, or a coating instead.

The best way to find out is a roof walk. We look at your deck, drains, insulation, and rooftop units. Then we tell you which roofing system fits and what it costs. See all of our commercial roofing services or reach us on the contact page.

About the Author

Todd Schrader, Vice President, J.D. Helton Roofing Co. (TN License #9540). J.D. Helton Roofing is a family-owned commercial roofing contractor. We have served Chattanooga and the Southeast since 1932. We are an authorized Carlisle roof systems partner.

Start Saving on Energy With the Right Roof

Since 1932, J.D. Helton Roofing has helped Chattanooga building owners choose roofing systems that last. Ask us about Carlisle TPO.

Call (423) 867-4400 →
blog author avatar
Todd Schrader from JD Helton Roofing
Back to Blog

© 2026 J.D. Helton Roofing Co., Inc. All rights reserved. | TN Dept. of Commerce & Insurance | Privacy Policy | Terms of Service

License #9540•BBB Accredited•Versico Partner•Licensed | Bonded | Insured